-
hcup-us.ahrq.gov/db/nation/nis/tools/stats/NIS_1998_Quality_Report.PDF
January 01, 1998 - AGE and LOS calculated in a manner consistent with methods used for HCUP processing, thus these data
-
hcup-us.ahrq.gov/db/nation/nis/APS-DRGsWeightsV25Public.pdf
June 01, 2009 - Means are recalculated and weights are
derived by dividing these means by averages calculated across … Finally, a series of summary statistics were
calculated from the output files to assess data quality … CALCULATE AND APPLY TRIMS
Initial outlier trim points were calculated at 3.0 standard deviations from … Using these
trimmed data, a second set of trim points was calculated, again using 3.0 standard
deviations … The latter was calculated by
dividing the total days, charges, or deaths in the input database by the
-
hcup-us.ahrq.gov/db/ccr/ip-ccr/CCR-CD-SID-UserGuide-2001-2018-v2.pdf
January 01, 2018 - • APICC is missing when there is no cost information in the HCRIS (PPS) data or the
calculated cost-to-charge … Hospital Type for Grouping (HTYPE)
The hospital type for grouping peer hospitals (HTYPE) is calculated … These include bedsize,
type of ownership/control, and hospital urban/rural location.The GAPICC is calculated … For hospitals that were missing accounting
reports in the initial files, the APICC was calculated from
-
hcup-us.ahrq.gov/reports/statbriefs/sb308-hospital-sepsis-2019-2021.pdf
January 01, 2021 - 2019
and 2021
Abbreviation: SNH, safety-net hospital
Note: Average length of sepsis stay was calculated … The unit of analysis is a hospital with summary statistics calculated on the hospital discharges (i.e … Length of stay
The length of stay is calculated as the difference of the discharge date and the admission … Calculations
Mortality rate
The mortality rate per 100 sepsis inpatient stays is calculated as follows … charges were imputed using the average total hospital charges for
the Diagnosis Related Group (DRG) calculated
-
hcup-us.ahrq.gov/reports/methods/2000NISComparisonReportFinal.pdf
February 28, 2003 - standard errors than
those calculated from the NHDS. … b A reliable standard error could not be calculated. … b A reliable standard error could not be calculated. … b A reliable standard error could not be calculated. … b A reliable standard error could not be calculated.
-
hcup-us.ahrq.gov/db/nation/nis/NIS_Introduction_2009.jsp
January 01, 2009 - MDC_NoPOA and the Diagnosis Related Group (DRG) calculated without POA indicators (DRG_NoPOA) are useful … These alternate weights were calculated in the same way as the weights for the 1998 and later years of … Standard errors and confidence intervals can then be calculated from the validation data. … Hospital Weights
Hospital weights to the universe were calculated by post-stratification. … Discharge weights to the universe were calculated by post-stratification.
-
hcup-us.ahrq.gov/reports/methods/1999NISComparisonReportFinal.pdf
March 08, 2002 - NIS statistics were compared with those calculated from three other sources,
each of which is described … b A reliable standard error could not be calculated. … b A reliable standard error could not be calculated. … In addition, NIS estimates may be
calculated for literally thousands of special sub-populations that … The standard error was calculated for all three
categories, using the values of a and b provided in
-
hcup-us.ahrq.gov/db/nation/nis/APS-DRGs%20V23%20Weights%20Manual.pdf
August 01, 2006 - Means are recalculated and weights are derived
by dividing these means by averages calculated across … Finally, a series of summary statistics were
calculated from the output files to assess data quality … CAL CUL ATE A ND APPLY TR IMS
Initial outlier trim points were calculated at 3.0 standard deviations … Using these
trimmed data, a second set of trim points was calculated, again using 3.0 standard
deviations … The latter was calculated by
dividing the total days, charges, or deaths in the input database by the
-
hcup-us.ahrq.gov/db/nation/nis/NISIntroduction2014.pdf
November 01, 2016 - Population Covered in the 2014 NIS by Census Division
and Region, Calculated using the Estimated U.S … Standard
errors and confidence intervals can then be calculated from the validation data. … Prior to the 2012 NIS, NIS sample weights were calculated by dividing the number of universe
discharges … NIS discharge weights are calculated by dividing the
number of universe discharges by the number of … Population Covered in the 2014 NIS by Census Division and
Region, Calculated using the Estimated U.S
-
hcup-us.ahrq.gov/db/nation/nis/NIS_Introduction_2018.jsp
January 01, 2018 - Population Covered in the 2018 NIS by Census Division and Region, Calculated using the Estimated U.S. … totals of patients for a hospital) could be calculated for each sampled hospital. … Standard errors and confidence intervals can then be calculated from the validation data. … universe weight was calculated as:
DW s (universe) = DN s (universe) ÷ DN s (sample)
where DW s … Population Covered in the 2018 NIS by Census Division and Region, Calculated using the Estimated U.S.
-
hcup-us.ahrq.gov/db/nation/nis/NIS_Introduction_2016.jsp
January 01, 2016 - Population Covered in the 2016 NIS by Census Division and Region, Calculated using the Estimated U.S. … totals of patients for a hospital) could be calculated for each sampled hospital. … Standard errors and confidence intervals can then be calculated from the validation data. … universe weight was calculated as:
DW s (universe) = DN s (universe) ÷ DN s (sample)
where DW s … Population Covered in the 2016 NIS by Census Division and Region, Calculated using the Estimated U.S.
-
hcup-us.ahrq.gov/db/nation/neds/NEDS2020Introduction.pdf
September 01, 2022 - Hospital Weights
Hospital weights were calculated by stratum. … Discharge Weights
Discharge weights were also calculated by stratum. … Estimates of aggregate charges should be calculated as the product of the number of
discharges times … Standard errors and confidence intervals then can be calculated from the validation data. … b NHIS estimates were calculated using the values provided in the survey (0, 1, 2, 3, 4+).
-
hcup-us.ahrq.gov/db/nation/nis/NIS_Introduction_2016.pdf
January 01, 2016 - Population Covered in the 2016 NIS by Census Division
and Region, Calculated using the Estimated U.S … Prior to the 2012 NIS, NIS sample weights were calculated by dividing the number of universe
discharges … NIS discharge weights are calculated by dividing the
number of universe discharges by the number of … Population Covered in the 2016 NIS by Census Division and
Region, Calculated using the Estimated U.S … Population Covered in the 2016 NIS by Census Division and Region, Calculated using the Estimated U.S.
-
hcup-us.ahrq.gov/reports/methods/methods.jsp
February 01, 2025 - 565 KB; HTML )
Addendum: Provides additional guidance to ensure that variance estimates are calculated … PDF file, 322 KB)
Addendum: Provides additional guidance to ensure that variance estimates are calculated … 642 KB; HTML )
Addendum: Provides additional guidance to ensure that variance estimates are calculated
-
hcup-us.ahrq.gov/db/nation/neds/NEDS_Introduction_2009.jsp
January 01, 2009 - Hospital Weights
Hospital weights to the universe were calculated by poststratification. … Discharge Weights
Discharge weights to the universe were calculated by poststratification. … Sampling probabilities were calculated to select 20% of the universe contained in each stratum, which … To ensure that weights are used appropriately and estimates and variances are calculated accurately, … Standard errors and confidence intervals then can be calculated from the validation data.
-
hcup-us.ahrq.gov/db/nation/nis/NIS_Introduction_2011.jsp
January 01, 2011 - These alternate weights were calculated in the same way as the weights for the 1998 and later years of … Standard errors and confidence intervals can then be calculated from the validation data. … Hospital Weights
Hospital weights to the universe were calculated by post-stratification. … Discharge weights to the universe were calculated by post-stratification. … Figure 9: Percentage of U.S.Population in 2010 NIS States, by Region Calculated using the estimated
-
hcup-us.ahrq.gov/db/nation/nis/NIS_Introduction_2010.jsp
January 01, 2010 - These alternate weights were calculated in the same way as the weights for the 1998 and later years of … Standard errors and confidence intervals can then be calculated from the validation data. … Hospital Weights
Hospital weights to the universe were calculated by post-stratification. … Within each stratum s, each NIS sample hospital's universe weight was calculated as:
W s (universe) … Discharge weights to the universe were calculated by post-stratification.
-
hcup-us.ahrq.gov/tech_assist/nationalestimates/508_course/508course_2018.jsp
January 01, 2018 - The discharge weights were calculated for NIS data by first stratifying the NIS hospitals on the same … A weight was then calculated for each stratum, by dividing the number of universe discharges in that … Prior to 2012, hospital weights are calculated for each of the NIS strata. … A weight was then calculated for each stratum by dividing the number of universe of ED visits in that … HOSPWT was also calculated according to the NEDS strata.
-
hcup-us.ahrq.gov/db/nation/kid/kid_2009_introduction.jsp
January 01, 2009 - without Present On Admission (POA) indicators (DRG_NoPOA) and MDC in use on discharge date, calculated … These alternative weights were calculated in the same way as the weights for the 2000 and later years … Standard errors and confidence intervals can then be calculated from the validation data. … Discharge weights to the universe were calculated by post-stratification. … Within stratum k , for hospital i , each KID sample discharge's universe weight was calculated as:
-
hcup-us.ahrq.gov/db/nation/neds/NEDS_Introduction_2019.jsp
January 01, 2019 - Hospital Weights
Hospital weights were calculated by stratum. … Discharge Weights
Discharge weights were also calculated by stratum. … Sampling probabilities were calculated to select 20 percent of the universe contained in each stratum … Standard errors and confidence intervals then can be calculated from the validation data. … b NHIS estimates were calculated using the values provided in the survey (0, 1, 3, 4+).